Table 2

Key technology and policies in electricity sector

Literature Measures Evaluation
Adaptation to climate change Key technology Qin et al., 2020 [16] Implementing adaptation measures to prevent overflow of the Three Gorges Dam From 2080 to 2099, the increase could range from 2% to 8.1%, thereby improving the power generation efficiency of the Three Gorges Dam.
He et al., 2020 [18] PA-DDS algorithm The PA-DDS algorithm can significantly increase the annual power generation of cascade reservoirs, by up to 3.7% in GCM-BCC or 4.8% in GCM-BNU.
Hashim et al., 2019 [23] Cleaning robots Cleaning robots have been designed that can detect the power generation performance of the solar system and actively clean it when the performance drops.
Sun et al., 2020 [27] Adjust the rotor speed and pitch angle of wind turbines. Achieving maximum power coefficient at any wind speed and any wind direction
Mitigation to climate change Key technology Yang et al., 2017 [41] Wind generation From 2008 to 2015, wind power contributed to a reduction of 66,854 × 104 t of CO2 and 173 × 104 t of SO2.
Ming et al.,2019 [46] The hybrid use of hydropower technology with other renewable energy technologies The results showed that compared with the traditional operation mode, the annual average power generation and power supply reliability of the optimal rule curve increased to 7.3 billion kWh (4.3%) and 90% (47.5%), respectively, while the water shortage index dropped to 114 ( 6.6%).
Qaisrani et al., 2021 [49] Concentrated solar power (CSP) The ability of CSP systems to operate at extremely high temperatures and offer thermal energy storage integration gives them an advantage over other renewable energy sources. This is important to alleviate China’s night-time industrial electricity demand.
Government policy Song et al., 2022 [76] Total target planning Those policy instruments provide an important foundation for promoting the healthy development of renewable energy industry.
Feed-in tariffs
Cost sharing and Tax preference

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.