Hollow multishelled structure: A versatile platform for boosting the performance of sodium-ion batteries

Special Topic: Hollow Multishelled Structure

Open Access

Review

Issue		Natl Sci Open Volume 5, Number 3, 2026 Special Topic: Hollow Multishelled Structure


Article Number		20260014
Number of page(s)		31
Section		Materials Science
DOI		https://doi.org/10.1360/nso/20260014
Published online		20 March 2026

Weng J, Jossen A, Stefanopoulou A, et al. Fast-charging lithium-ion batteries require a systems engineering approach. Nat Energy 2025; 10: 1289-1290. [Article] [Google Scholar]
Xu J, Cai X, Cai S, et al. High-energy lithium-ion batteries: Recent progress and a promising future in applications. Energy Environ Mater 2023; 6: e12450. [Article] [Google Scholar]
Han L, Ling Y, Liu F, et al. Fiber-shaped aqueous battery: Design, advancements, and perspectives. Natl Sci Open 2025; 4: 20250051. [Article] [Google Scholar]
Zhang Z, Chen Y, Sun S, et al. Recent progress on three-dimensional nanoarchitecture anode materials for lithium/sodium storage. J Mater Sci Tech 2022; 119: 167-181. [Article] [Google Scholar]
Vaalma C, Buchholz D, Weil M, et al. A cost and resource analysis of sodium-ion batteries. Nat Rev Mater 2018; 3: 18013. [Article] [Google Scholar]
Zhang F, He B, Xin Y, et al. Emerging chemistry for wide-temperature sodium-ion batteries. Chem Rev 2024; 124: 4778-4821. [Article] [Google Scholar]
Zhao C, Lu Y, Li Y, et al. Novel methods for sodium-ion battery materials. Small Methods 2017; 1: 1600063. [Article] [Google Scholar]
Bai Z, Yao Q, Wang M, et al. Low-temperature sodium-ion batteries: Challenges and progress. Adv Energy Mater 2024; 14: 2303788. [Article] [Google Scholar]
Yang C, Xin S, Mai L, et al. Materials design for high-safety sodium-ion battery. Adv Energy Mater 2021; 11: 2000974. [Article] [Google Scholar]
He H, Sun D, Tang Y, et al. Understanding and improving the initial Coulombic efficiency of high-capacity anode materials for practical sodium ion batteries. Energy Storage Mater 2019; 23: 233-251. [Article] [Google Scholar]
Yang Y, Yang Y, Yang Y, et al. Advanced electrolyte engineering for low-temperature sodium-ion batteries. Adv Mater 2026; 38: e13868. [Article] [Google Scholar]
Zhang Z, Wang R, Zeng J, et al. Size effects in sodium ion batteries. Adv Funct Mater 2021; 31: 2106047. [Article] [Google Scholar]
Wang Z, Zhang H, Gao W, et al. Enabling ultrafast Na⁺ diffusion kinetics via short-range-ordered and few-layered pitch-derived hard carbon towards high-rate sodium-ion batteries. Energy Storage Mater 2025; 83: 104740. [Article] [Google Scholar]
Liang Y, Lai WH, Miao Z, et al. Nanocomposite materials for the sodium-ion battery: A review. Small 2018; 14: 1702514. [Article] [Google Scholar]
Tsujimoto S, Lee C, Nunokawa R, et al. Kinetic insights into na ion transfer at the carbon-based negative electrode/electrolyte interfaces for sodium-ion batteries. ChemElectroChem 2024; 11: e202400275. [Article] [Google Scholar]
Zhao C, Wang Q, Yao Z, et al. Rational design of layered oxide materials for sodium-ion batteries. Science 2020; 370: 708-711. [Article] [Google Scholar]
Fang Y, Yu XY, Lou XWD. Nanostructured electrode materials for advanced sodium-ion batteries. Matter 2019; 1: 90-114. [Article] [Google Scholar]
Hong F, Li Y, Zhou X, et al. Recent advances for medium- and high-entropy based layered cathodes for sodium ion batteries. Nano Res Energy 2025; 4: e9120185. [Article] [Google Scholar]
Li W, Duan Y, Ge S, et al. Locking-chain electrolyte additive enabling moisture-tolerant electrolytes for sodium-ion batteries. Nat Commun 2025; 16: 6405. [Article] [Google Scholar]
Yang M, Chang X, Wang L, et al. Interface modulation of metal sulfide anodes for long-cycle-life sodium-ion batteries. Adv Mater 2023; 35: 2208705. [Article] [Google Scholar]
Yang JL, Zhao XX, Zhang W, et al. “Pore-hopping” ion transport in cellulose-based separator towards high-performance sodium-ion batteries. Angew Chem Int Ed 2023; 62: e202300258. [Article] [Google Scholar]
Li B, Liu Y, Han X, et al. Electrospun nanofiber surface-modified polyethylene separator for enhanced cycling stability and low-temperature performance of sodium-ion batteries. Chem Eng J 2024; 501: 157803. [Article] [Google Scholar]
Mao D, Wang C, Li W, et al. Hollow multishelled structure: Synthesis chemistry and application. Chem Res Chin Univ 2024; 40: 346-393. [Article] [Google Scholar]
Salhabi EHM, Zhao J, Wang J, et al. Hollow multi-shelled structural TiO_2−x with multiple spatial confinement for long-life lithium–sulfur batteries. Angew Chem 2019; 131: 9176-9180. [Article] [Google Scholar]
Wei P, Wang H, Yang M, et al. Relocatable hollow multishelled structure-based membrane enables dendrite-free lithium deposition for ultrastable lithium metal batteries. Adv Energy Mater 2024; 14: 2400108. [Article] [Google Scholar]
Rao F, Xiao Q, Wei Y, et al. Balanced polysulfide containment and lithium ion transport in lithium-sulfur batteries via nitrogen-doped carbon hollow multi-shelled structures on modified separators. Chem Res Chin Univ 2024; 40: 690-698. [Article] [Google Scholar]
Li B, Wang J, Bi R, et al. Accurately localizing multiple nanoparticles in a multishelled matrix through shell-to-core evolution for maximizing energy-storage capability. Adv Mater 2022; 34: 2200206. [Article] [Google Scholar]
Zhao X, Yang M, Wang J, et al. Hollow multishelled structural Li-rich cathode with Al doping enabling capacity and voltage stabled Li-ion batteries. Chem Res Chin Univ 2023; 39: 630-635. [Article] [Google Scholar]
Zhao J, Wang J, Bi R, et al. General synthesis of multiple-cores@multiple-shells hollow composites and their application to lithium-ion batteries. Angew Chem Int Ed 2021; 60: 25719-25722. [Article] [Google Scholar]
Wang H, Wei P, Wang J, et al. Hollow multishelled structure reviving lithium metal anode for high-energy-density batteries. Chem Res Chin Univ 2024; 40: 428-436. [Article] [Google Scholar]
Xu S, Hessel CM, Ren H, et al. α-Fe₂O₃ multi-shelled hollow microspheres for lithium ion battery anodes with superior capacity and charge retention. Energy Environ Sci 2014; 7: 632-637. [Article] [Google Scholar]
Ren H, Yu R, Wang J, et al. Multishelled TiO₂ hollow microspheres as anodes with superior reversible capacity for lithium ion batteries. Nano Lett 2014; 14: 6679-6684. [Article] [Google Scholar]
Wang J, Tang H, Zhang L, et al. Multi-shelled metal oxides prepared via an anion-adsorption mechanism for lithium-ion batteries. Nat Energy 2016; 1: 16050. [Article] [Google Scholar]
Cai X, Yue Y, Yi Z, et al. Challenges and industrial perspectives on the development of sodium ion batteries. Nano Energy 2024; 129: 110052. [Article] [Google Scholar]
Yabuuchi N, Kubota K, Dahbi M, et al. Research development on sodium-ion batteries. Chem Rev 2014; 114: 11636-11682. [Article] [Google Scholar]
Hwang JY, Myung ST, Sun YK. Sodium-ion batteries: Present and future. Chem Soc Rev 2017; 46: 3529-3614. [Article] [Google Scholar]
Chen Y, Zhao B, Yang Y, et al. Toward high-areal-capacity electrodes for lithium and sodium ion batteries. Adv Energy Mater 2022; 12: 2201834. [Article] [Google Scholar]
Yang F, Gao H, Chen J, et al. Phosphorus-based materials as the anode for sodium-ion batteries. Small Methods 2017; 1: 1700216. [Article] [Google Scholar]
Song J, Xiao B, Lin Y, et al. Interphases in sodium-ion batteries. Adv Energy Mater 2018; 8: 1703082. [Article] [Google Scholar]
Li H, Xu M, Zhang Z, et al. Engineering of polyanion type cathode materials for sodium-ion batteries: Toward higher energy/power density. Adv Funct Mater 2020; 30: 2000473. [Article] [Google Scholar]
Lv Z, Li T, Hou X, et al. Solvation structure and solid electrolyte interface engineering for excellent Na⁺ storage performances of hard carbon with the ether-based electrolytes. Chem Eng J 2022; 430: 133143. [Article] [Google Scholar]
Qin N, Sun Y, Hu C, et al. Boosting high initial coulombic efficiency of hard carbon by in-situ electrochemical presodiation. J Energy Chem 2023; 77: 310-316. [Article] [Google Scholar]
Yang Y, Wu C, He XX, et al. Boosting the development of hard carbon for sodium-ion batteries: Strategies to optimize the initial coulombic efficiency. Adv Funct Mater 2024; 34: 2302277. [Article] [Google Scholar]
Li Y, Vasileiadis A, Zhou Q, et al. Origin of fast charging in hard carbon anodes. Nat Energy 2024; 9: 134-142. [Article] [Google Scholar]
Wang J, Wan J, Wang D. Hollow multishelled structures for promising applications: Understanding the structure–performance correlation. Acc Chem Res 2019; 52: 2169-2178. [Article] [Google Scholar]
Wang L, Wan J, Wang J, et al. Small structures bring big things: Performance control of hollow multishelled structures. Small Struct 2021; 2: 2000041. [Article] [Google Scholar]
Yu L, Hu H, Wu HB, et al. Complex hollow nanostructures: Synthesis and energy-related applications. Adv Mater 2017; 29: 1604563. [Article] [Google Scholar]
Cui Y, Zhang L, Huo Q, et al. Construction of hollow porous double-shell NSC@WS₂ nanospheres for improved sodium-ion battery performance. J Energy Storage 2025; 113: 115688. [Article] [Google Scholar]
Ma M, Yao Y, Wu Y, et al. Progress and prospects of transition metal sulfides for sodium storage. Adv Fiber Mater 2020; 2: 314-337. [Article] [Google Scholar]
Li L, Zheng Y, Zhang S, et al. Recent progress on sodium ion batteries: Potential high-performance anodes. Energy Environ Sci 2018; 11: 2310-2340. [Article] [Google Scholar]
Zhao R, Sun N, Xu B. Recent advances in heterostructured carbon materials as anodes for sodium-ion batteries. Small Struct 2021; 2: 2100132. [Article] [Google Scholar]
Zhou L, Cui Y, Niu P, et al. Biomass-derived hard carbon material for high-capacity sodium-ion battery anode through structure regulation. Carbon 2025; 231: 119733. [Article] [Google Scholar]
Wang H, Chen H, Chen C, et al. Tea-derived carbon materials as anode for high-performance sodium ion batteries. Chin Chem Lett 2023; 34: 107465. [Article] [Google Scholar]
Hu Z, Chen Z, Liu Q, et al. Compact TiO₂@SnO₂@C heterostructured particles as anode materials for sodium-ion batteries with improved volumetric capacity. iScience 2023; 26: 106642. [Article] [Google Scholar]
Jing WT, Yang CC, Jiang Q. Recent progress on metallic Sn- and Sb-based anodes for sodium-ion batteries. J Mater Chem A 2020; 8: 2913-2933. [Article] [Google Scholar]
Qu B, Ma C, Ji G, et al. Layered SnS₂-reduced graphene oxide composite—A high-capacity, high-rate, and long-cycle life sodium-ion battery anode material. Adv Mater 2014; 26: 3854-3859. [Article] [Google Scholar]
Wang D, Ma Q, He H, et al. Double-confined nanoheterostructure Sb/Sb₂S₃@Ti₃C₂T_x@C toward ultra-stable Li-/Na-ion batteries. Rare Met 2024; 43: 2067-2079. [Article] [Google Scholar]
Bhar M, Ghosh S, Martha SK. Designing freestanding electrodes with Fe₂O₃-based conversion type anode material for sodium-ion batteries. J Alloys Compd 2023; 948: 169670. [Article] [Google Scholar]
Jiang L, Dou Y, Song W, et al. Heterointerface magic: How FeS₂/NiS₂@NC nanoparticles transform sodium-ion battery anode performance. J Colloid Interface Sci 2025; 686: 589-598. [Article] [Google Scholar]
Hong QJ, Subramani M, Hsieh CM, et al. First-principles investigation of FeP@Graphene as anode material for sodium-ion batteries. Appl Surf Sci 2026; 719: 165131. [Article] [Google Scholar]
Zhang L, Zhu B, Xu D, et al. Yolk-shell FeSe₂@CoSe₂/FeSe₂ heterojunction as anode materials for sodium-ion batteries with high rate capability and stability. J Mater Sci Tech 2024; 172: 185-195. [Article] [Google Scholar]
Babu SK, Wu PJ, Liu WR. MOF-derived spinel NiCo₂O₄ anchored single-walled carbon nanotubes nanocomposite as potential anode materials for Na-ion batteries. Electrochim Acta 2025; 535: 146600. [Article] [Google Scholar]
Wan F, Wu XL, Guo JZ, et al. Nanoeffects promote the electrochemical properties of organic Na₂C₈H₄O₄ as anode material for sodium-ion batteries. Nano Energy 2015; 13: 450-457. [Article] [Google Scholar]
Wu X, Ma J, Ma Q, et al. A spray drying approach for the synthesis of a Na₂C₆H₂O₄/CNT nanocomposite anode for sodium-ion batteries. J Mater Chem A 2015; 3: 13193-13197. [Article] [Google Scholar]
Liu J, You Y, Huang L, et al. Precisely tunable instantaneous carbon rearrangement enables low-working-potential hard carbon toward sodium-ion batteries with enhanced energy density. Adv Mater 2024; 36: 2407369. [Article] [Google Scholar]
Yin Y, Tan Y, Lu Y, et al. A soft carbon/hard carbon composite synthesized from asphalt/pecan shells as an anode material for sodium-ion batteries. J Energy Storage 2025; 113: 115649. [Article] [Google Scholar]
Sun J, Lee HW, Pasta M, et al. A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries. Nat Nanotech 2015; 10: 980-985. [Article] [Google Scholar]
An J, Wang F, Yang JY, et al. An ion-pumping interphase on graphdiyne/graphite heterojunction for fast-charging lithium-ion batteries. CCS Chem 2024; 6: 110-124. [Article] [Google Scholar]
Wang F, Jiang Z, Zhang Y, et al. Revitalizing sodium-ion batteries via controllable microstructures and advanced electrolytes for hard carbon. eScience 2024; 4: 100181. [Article] [Google Scholar]
Fang H, Wei X, Hu W, et al. Regulating interfacial chemistry of hard carbon anodes by in situ coupling strategy for high-rate sodium-ion batteries. eSci Energy 2025; 1: 100001. [Article] [Google Scholar]
Ma Y, Cheng Y, Dang Z, et al. The tune of shell numbers of multi-shell hollow mesoporous carbon microspheres for enhanced microwave absorption. Carbon 2024; 227: 119267. [Article] [Google Scholar]
Bin DS, Li Y, Sun YG, et al. Structural engineering of multishelled hollow carbon nanostructures for high-performance Na-ion battery anode. Adv Energy Mater 2018; 8: 1800855. [Article] [Google Scholar]
Bu L, Kuai X, Zhu W, et al. Nitrogen-doped double-shell hollow carbon spheres for fast and stable sodium ion storage. Electrochim Acta 2020; 356: 136804. [Article] [Google Scholar]
Zhang K, Li X, Liang J, et al. Nitrogen-doped porous interconnected double-shelled hollow carbon spheres with high capacity for lithium ion batteries and sodium ion batteries. Electrochim Acta 2015; 155: 174-182. [Article] [Google Scholar]
Yu M, Sun M, Zhu L, et al. Double-shell and hierarchical porous nitrogen-doped carbon nanocages as superior anode material for advanced sodium-ion batteries. J Energy Storage 2024; 86: 111211. [Article] [Google Scholar]
Chattopadhyay S, Pramanik A, Pieshkov T, et al. B, N Co-doped hard carbon nano-sponge enhancing half and full cell performance in Na-ion batteries. Small 2025; 21: 2500120. [Article] [Google Scholar]
Ma X, Hu J, Zhang W, et al. An effective B-doped strategy to regulate the closed-pore formation of hard carbon nanospheres for sodium-ion batteries. J Energy Storage 2025; 126: 117149. [Article] [Google Scholar]
Jin Q, Wang K, Feng P, et al. Surface-dominated storage of heteroatoms-doping hard carbon for sodium-ion batteries. Energy Storage Mater 2020; 27: 43-50. [Article] [Google Scholar]
Hong Z, Zhen Y, Ruan Y, et al. Rational design and general synthesis of S-doped hard carbon with tunable doping sites toward excellent Na-ion storage performance. Adv Mater 2018; 30: 1802035. [Article] [Google Scholar]
Liu ZG, Zhao J, Yao H, et al. P-doped spherical hard carbon with high initial coulombic efficiency and enhanced capacity for sodium ion batteries. Chem Sci 2024; 15: 8478-8487. [Article] [Google Scholar]
Wang Y, Wang Y, Zhang L, et al. Exogenous phosphorus supplementation and sodium reduction treatment to realize N, P co-doped hard carbon with reduced oxygen-containing groups for high-performance sodium-ion batteries. J Power Sources 2025; 630: 236156. [Article] [Google Scholar]
Liu L, Gui L, Hu R, et al. Bi-doped commercial hard carbon with enhanced slope capacity to deliver superior rate performance for sodium-ion batteries. ACS Appl Energy Mater 2025; 8: 4211-4219. [Article] [Google Scholar]
Lu Z, Wang J, Feng W, et al. Zinc single-atom-regulated hard carbons for high-rate and low-temperature sodium-ion batteries. Adv Mater 2023; 35: 2211461. [Article] [Google Scholar]
Edison E, Sreejith S, Ren H, et al. Microstructurally engineered nanocrystalline Fe–Sn–Sb anodes: Towards stable high energy density sodium-ion batteries. J Mater Chem A 2019; 7: 14145-14152. [Article] [Google Scholar]
Zheng SM, Tian YR, Liu YX, et al. Alloy anodes for sodium-ion batteries. Rare Met 2021; 40: 272-289. [Article] [Google Scholar]
Wang X, Zhao X, Wang L. Bulk alloy anodes for sodium-ion batteries. Batteries Supercaps 2025; 8: e202400551. [Article] [Google Scholar]
Lao M, Zhang Y, Luo W, et al. Alloy-based anode materials toward advanced sodium-ion batteries. Adv Mater 2017; 29: 1700622. [Article] [Google Scholar]
Song K, Liu C, Mi L, et al. Recent progress on the alloy-based anode for sodium-ion batteries and potassium-ion batteries. Small 2021; 17: 1903194. [Article] [Google Scholar]
Tan H, Chen D, Rui X, et al. Peering into alloy anodes for sodium-ion batteries: Current trends, challenges, and opportunities. Adv Funct Mater 2019; 29: 1808745. [Article] [Google Scholar]
Li Y, Mei Y, Liu H, et al. Functional carbon dots induced defect configuration entropy strengthening polyanion cathode for ultrafast-charging sodium ion batteries in a wide temperature. Nano Energy 2024; 130: 110107. [Article] [Google Scholar]
He S, Wu H, Li S, et al. Small but mighty: Empowering sodium/potassium-ion battery performance with S-doped SnO₂ quantum dots embedded in N, S codoped carbon fiber network. Carbon Energy 2024; 6: e486. [Article] [Google Scholar]
Wang YX, Yang J, Chou SL, et al. Uniform yolk-shell iron sulfide–carbon nanospheres for superior sodium–iron sulfide batteries. Nat Commun 2015; 6: 8689. [Article] [Google Scholar]
Wang JW, Liu XH, Mao SX, et al. Microstructural evolution of tin nanoparticles during in situ sodium insertion and extraction. Nano Lett 2012; 12: 5897-5902. [Article] [Google Scholar]
Wu X, Wu H, Xie B, et al. Atomic welded dual-wall hollow nanospheres for three-in-one hybrid storage mechanism of alkali metal ion batteries. ACS Nano 2021; 15: 14125-14136. [Article] [Google Scholar]
He J, Wei Y, Zhai T, et al. Antimony-based materials as promising anodes for rechargeable lithium-ion and sodium-ion batteries. Mater Chem Front 2018; 2: 437-455. [Article] [Google Scholar]
Su J, Li W, Duan T, et al. Graphene/antimonene/graphene heterostructure: A potential anode for sodium-ion batteries. Carbon 2019; 153: 767-775. [Article] [Google Scholar]
Liu Y, Qing Y, Zhou B, et al. Yolk–shell Sb@void@graphdiyne nanoboxes for high-rate and long cycle life sodium-ion batteries. ACS Nano 2023; 17: 2431-2439. [Article] [Google Scholar]
Kong M, Liu Y, Zhou B, et al. Rational design of Sb@C@TiO₂ triple-shell nanoboxes for high-performance sodium-ion batteries. Small 2020; 16: 2001976. [Article] [Google Scholar]
Sang J, Liu K, Zhang X, et al. Enabling high-performance sodium battery anodes by complete reduction of graphene oxide and cooperative in-situ crystallization of ultrafine SnO₂ nanocrystals. Energy Environ Mater 2023; 6: e12431. [Article] [Google Scholar]
Cui Z, He SA, Zhu J, et al. Tailoring the void space using nanoreactors on carbon fibers to confine SnS₂ nanosheets for ultrastable lithium/sodium-ion batteries. Small Methods 2022; 6: 2101484. [Article] [Google Scholar]
Zheng Y, Liu C, Zhang Z, et al. Regulating (010) exposed facets of a Sb₂O₃ anode to achieve high-performance sodium-ion batteries. Nano Lett 2025; 25: 5461-5468. [Article] [Google Scholar]
Xie J, Liu L, Xia J, et al. Template-free synthesis of Sb₂S₃ hollow microspheres as anode materials for lithium-ion and sodium-ion batteries. Nano-Micro Lett 2018; 10: 12. [Article] [Google Scholar]
Liu Z, Wang X, Wu Z, et al. Ultrafine Sn₄P₃ nanocrystals from chloride reduction on mechanically activated Na surface for sodium/lithium ion batteries. Nano Res 2020; 13: 3157-3164. [Article] [Google Scholar]
Xie B, Wu X, Wang JH, et al. Confinement sacrifice template synthesis of size controllable heterogeneous double-layer hollow spheres SnO₂@Void@HCSs as anode for Li⁺/Na⁺ batteries. J Electroanal Chem 2022; 923: 116830. [Article] [Google Scholar]
Huang S, Meng C, Xiao M, et al. Multi-shell tin phosphide nanospheres as high performance anode material for a sodium ion battery. Sustain Energy Fuels 2017; 1: 1944-1949. [Article] [Google Scholar]
Choi SH, Kang YC. Synergetic effect of yolk–shell structure and uniform mixing of SnS–MoS₂ nanocrystals for improved Na-ion storage capabilities. ACS Appl Mater Interfaces 2015; 7: 24694-24702. [Article] [Google Scholar]
Xie F, Zhang L, Gu Q, et al. Multi-shell hollow structured Sb₂S₃ for sodium-ion batteries with enhanced energy density. Nano Energy 2019; 60: 591-599. [Article] [Google Scholar]
Zhang Y, Lim YV, Huang S, et al. Tailoring NiO nanostructured arrays by sulfate anions for sodium-ion batteries. Small 2018; 14: 1800898. [Article] [Google Scholar]
Liu Y, Lin Q, Chen X, et al. Fe₃O₄/Fe/FeS tri-heterojunction node spawning N-carbon nanotube scaffold structure for high-performance sodium-ion battery. Energy Environ Mater 2024; 7: e12684. [Article] [Google Scholar]
Zhao W, Zhou Y, Zhou H, et al. Optimizing reversible phase-transformation of FeS₂ anode via atomic-interface engineering toward fast-charging sodium storage: Theoretical predication and experimental validation. Adv Sci 2025; 12: 2411884. [Article] [Google Scholar]
Wu H, Xia G, Yu X. Unlocking the potential of iron sulfides for sodium-ion batteries by ultrafine pulverization. Small 2024; 20: 2312190. [Article] [Google Scholar]
Liang J, Sun J, Cao X, et al. Enhanced reaction kinetics in sodium-ion batteries achieved by 3D heterostructure CoS₂/CoS with self-induced internal electric field. Adv Sci 2025; 12: 2502241. [Article] [Google Scholar]
Zhang X, Wang J, Hou W, et al. Prussian blue analogues-derived highly stable and conductive CoSe₂/FeSe₂@C composite anode for sodium-ion batteries. J Energy Storage 2025; 138: 118701. [Article] [Google Scholar]
Pan Q, Zhang M, Zhang L, et al. FeSe₂@C microrods as a superior long-life and high-rate anode for sodium ion batteries. ACS Nano 2020; 14: 17683-17692. [Article] [Google Scholar]
Ihsan-Ul-Haq M, Huang H, Cui J, et al. Chemical interactions between red P and functional groups in NiP₃/CNT composite anodes for enhanced sodium storage. J Mater Chem A 2018; 6: 20184-20194. [Article] [Google Scholar]
Xia J, Guo J, Li S, et al. Progress of FeP anode materials for alkali metal ion batteries. RSC Adv 2025; 15: 10395-10418. [Article] [Google Scholar]
Xia H, Li Z, Ma J, et al. Developments and prospects of conversion reaction-based anode materials in sodium-ion batteries. Chem Commun 2025; 61: 18987-19003. [Article] [Google Scholar]
Puthusseri D, Wahid M, Ogale S. Conversion-type anode materials for alkali-ion batteries: State of the art and possible research directions. ACS Omega 2018; 3: 4591-4601. [Article] [Google Scholar]
Qi S, Mi L, Song K, et al. Understanding shuttling effect in sodium ion batteries for the solution of capacity fading: FeS₂ as an example. J Phys Chem C 2019; 123: 2775-2782. [Article] [Google Scholar]
Wu C, Dou SX, Yu Y. The state and challenges of anode materials based on conversion reactions for sodium storage. Small 2018; 14: 1703671. [Article] [Google Scholar]
Chen S, Ye S, Xu X, et al. Recent advances in conversion-type iron-based materials for sodium-ion batteries. Microstructures 2025; 5: 2025084. [Article] [Google Scholar]
Xu H, Li H, Wang X. The anode materials for lithium-ion and sodium-ion batteries based on conversion reactions: A review. ChemElectroChem 2023; 10: e202201151. [Article] [Google Scholar]
Alcántara R, Jaraba M, Lavela P, et al. NiCo₂O₄ spinel: First report on a transition metal oxide for the negative electrode of sodium-ion batteries. Chem Mater 2002; 14: 2847-2848. [Article] [Google Scholar]
Zhu C, Xu F, Min H, et al. Identifying the conversion mechanism of NiCo₂O₄ during sodiation–desodiation cycling by in situ TEM. Adv Funct Mater 2017; 27: 1606163. [Article] [Google Scholar]
Zhang Y, Xiao X, Zhang W, et al. Facile formation of NiCo₂O₄ yolk-shell spheres for highly reversible sodium storage. J Alloys Compd 2019; 800: 125-133. [Article] [Google Scholar]
Zhang X, Zhou Y, Luo B, et al. Microwave-assisted synthesis of NiCo₂O₄ double-shelled hollow spheres for high-performance sodium ion batteries. Nano-Micro Lett 2018; 10: 13. [Article] [Google Scholar]
Li Y, Zhang S, Wang S, et al. A multi-shelled V₂O₃/C composite with an overall coupled carbon scaffold enabling ultrafast and stable lithium/sodium storage. J Mater Chem A 2019; 7: 19234-19240. [Article] [Google Scholar]
Wei Y, Cheng Y, Zhao D, et al. A universal formation mechanism of hollow multi-shelled structures dominated by concentration waves. Angew Chem Int Ed 2023; 62: e202302621. [Article] [Google Scholar]
Zhang X, Bi R, Wang J, et al. Delicate Co-control of shell structure and sulfur vacancies in interlayer-expanded tungsten disulfide hollow sphere for fast and stable sodium storage. Adv Mater 2023; 35: 2209354. [Article] [Google Scholar]
Wang H, Chen S, Fu C, et al. Recent advances in conversion-type electrode materials for post lithium-ion batteries. ACS Mater Lett 2021; 3: 956-977. [Article] [Google Scholar]
Wang X, Chen Y, Fang Y, et al. Synthesis of cobalt sulfide multi-shelled nanoboxes with precisely controlled two to five shells for sodium-ion batteries. Angew Chem Int Ed 2019; 58: 2675-2679. [Article] [Google Scholar]
Fang Y, Guan BY, Luan D, et al. Synthesis of CuS@CoS₂ double-shelled nanoboxes with enhanced sodium storage properties. Angew Chem Int Ed 2019; 58: 7739-7743. [Article] [Google Scholar]
Li X, Xiang Y, Deng R, et al. Metal organic frameworks-derived multi-shell copper-cobalt-zinc sulfide cubes for sodium-ion battery anode. Chem Eng J 2021; 425: 131501. [Article] [Google Scholar]
Chen M, Gu S, Li J, et al. Triple-shell hollow FeS/MoS₂ heterostructure anodes: Synergistic effects of built-in electric field on ultra-stable sodium storage. Adv Sci 2025; 12: e09997. [Article] [Google Scholar]
Chen M, Liu Y, Fang Z, et al. High-entropy sulfide nanoarchitectures with triple-shelled hollow design for durable sodium–ion batteries. Nanomaterials 2025; 15: 881. [Article] [Google Scholar]
Hou P, Dong M, Li F, et al. Recent advances in cathode materials with core–shell structures and concentration gradients for advanced sodium-ion batteries. Adv Funct Mater 2024; 34: 2409518. [Article] [Google Scholar]
Wu J, Tian J, Sun X, et al. Cycling performance of layered oxide cathode materials for sodium-ion batteries. Int J Miner Metall Mater 2024; 31: 1720-1744. [Article] [Google Scholar]
Xu XQ, Chen JY, Jiang Y, et al. Origins of high air sensitivity and treatment strategies in O3-type NaMn_1/3Fe_1/3Ni_1/3O₂. J Am Chem Soc 2024; 146: 22374-22386. [Article] [Google Scholar]
Huang J, Li W, Ye D, et al. Designing ultrastable P2/O3-type layered oxides for sodium ion batteries by regulating Na distribution and oxygen redox chemistry. J Energy Chem 2024; 94: 466-476. [Article] [Google Scholar]
Zhang S, Zhou T, Pan Y, et al. Constructing built-in electric field in Na₃V₂(PO₄)₃/NaV(P₂O₇) heterostructure with columnar cluster morphology boosting high capacity and energy density for sodium ion batteries. Adv Funct Mater 2026; 36: e14171. [Article] [Google Scholar]
Sun H, Jiang Y, Dai H, et al. Upcycling iron sulfate waste into low-cost and high-stability Na₂Fe(SO₄)₂ cathode materials for sodium-ion batteries. ACS Sustain Chem Eng 2025; 13: 15141-15148. [Article] [Google Scholar]
Cai Y, Cheng H, Chen Z, et al. The interface interaction of sulfur-doped carbon boosting kinetics of Na₄Fe₃(PO₄)₂(P₂O₇) for high rate and stable sodium-ion batteries. Sci China Mater 2025; 68: 3675-3684. [Article] [Google Scholar]
Yang L, Liu Q, Wan M, et al. Surface passivation of Na_xFe[Fe(CN)₆] cathode to improve its electrochemical kinetics and stability in sodium-ion batteries. J Power Sources 2020; 448: 227421. [Article] [Google Scholar]
Tang Y, Wang L, Hu J, et al. Epitaxial Nucleation of Na_xFeFe(CN)₆@rGO with improved lattice regularity as ultrahigh-rate cathode for sodium-ion batteries. Adv Energy Mater 2024; 14: 2303015. [Article] [Google Scholar]
Liu S, Yu H, Zhao Y, et al. Inhibiting phase transitions of prussian blue analogs with high-entropy strategy for ultralong-life sodium-ion battery cathodes. Small 2025; 21: 2504893. [Article] [Google Scholar]
Jiang M, Zhao Y, Hou Z, et al. leveraging sodium storage of water-deficient prussian blue analogues by deep eutectic chemistry. ACS Energy Lett 2026; 11: 526-536. [Article] [Google Scholar]
Jing Z, Kong L, Mamoor M, et al. Rational design of prussian blue analogues for ultralong and wide-temperature-range sodium-ion batteries. J Am Chem Soc 2025; 147: 3702-3713. [Article] [Google Scholar]
Yang H, Wang D, Liu Y, et al. Improvement of cycle life for layered oxide cathodes in sodium-ion batteries. Energy Environ Sci 2024; 17: 1756-1780. [Article] [Google Scholar]
Lu X, Li S, Li Y, et al. From lab to application: Challenges and opportunities in achieving fast charging with polyanionic cathodes for sodium-ion batteries. Adv Mater 2024; 36: 2407359. [Article] [Google Scholar]
Ge L, Song Y, Niu P, et al. Elaborating the crystal water of prussian blue for outstanding performance of sodium ion batteries. ACS Nano 2024; 18: 3542-3552. [Article] [Google Scholar]
Xiang X, Zhang K, Chen J. Recent advances and prospects of cathode materials for sodium-ion batteries. Adv Mater 2015; 27: 5343-5364. [Article] [Google Scholar]
Liu XY, Li S, Zhu YF, et al. Promoting layered oxide cathodes based on structural reconstruction for sodium-ion batteries: Reversible phase transition, stable interface regulation, and multifunctional intergrowth structure. Adv Funct Mater 2025; 35: 2414130. [Article] [Google Scholar]
Guo YJ, Jin RX, Fan M, et al. Sodium layered oxide cathodes: Properties, practicality and prospects. Chem Soc Rev 2024; 53: 7828-7874. [Article] [Google Scholar]
Wang J, Zhu YF, Su Y, et al. Routes to high-performance layered oxide cathodes for sodium-ion batteries. Chem Soc Rev 2024; 53: 4230-4301. [Article] [Google Scholar]
Zhang K, Kim D, Hu Z, et al. Manganese based layered oxides with modulated electronic and thermodynamic properties for sodium ion batteries. Nat Commun 2019; 10: 5203. [Article] [Google Scholar]
Lu D, Yao Z, Zhong Y, et al. Polypyrrole-coated sodium manganate hollow microspheres as a superior cathode for sodium ion batteries. ACS Appl Mater Interfaces 2019; 11: 15630-15637. [Article] [Google Scholar]
Zhao X, Wang J, Yu R, et al. Construction of multishelled binary metal oxides via coabsorption of positive and negative ions as a superior cathode for sodium-ion batteries. J Am Chem Soc 2018; 140: 17114-17119. [Article] [Google Scholar]
Jin T, Li H, Zhu K, et al. Polyanion-type cathode materials for sodium-ion batteries. Chem Soc Rev 2020; 49: 2342-2377. [Article] [Google Scholar]
Niu Y, Zhao Y, Xu M. Manganese-based polyanionic cathodes for sodium-ion batteries. Carbon Neutralization 2023; 2: 150-168. [Article] [Google Scholar]
Guo D, Chu S, Zhang B, et al. The development and prospect of stable polyanion compound cathodes in LIBs and promising complementers. Small Methods 2024; 8: 2400587. [Article] [Google Scholar]
Ni Q, Bai Y, Wu F, et al. Polyanion-type electrode materials for sodium-ion batteries. Adv Sci 2017; 4: 1600275. [Article] [Google Scholar]
Zhao L, Rong X, Niu Y, et al. Ostwald ripening tailoring hierarchically porous Na₃V₂(PO₄)₂O₂F hollow nanospheres for superior high-rate and ultrastable sodium ion storage. Small 2020; 16: 2004925. [Article] [Google Scholar]
Fu Q, Song F, Mu C, et al. Activating reversible multi-electron reaction of Na₃(VO)₂(PO₄)₂F cathode via Fe/F dual-doping for high-energy and stable sodium storage. Energy Storage Mater 2025; 74: 103960. [Article] [Google Scholar]
Qi Y, Tong Z, Zhao J, et al. Scalable room-temperature synthesis of multi-shelled Na₃(VOPO₄)₂F microsphere cathodes. Joule 2018; 2: 2348-2363. [Article] [Google Scholar]
Yin Y, Pei C, Xiong F, et al. Porous yolk-shell structured Na₃(VO)₂(PO₄)₂F microspheres with enhanced Na-ion storage properties. J Mater Sci Tech 2021; 83: 83-89. [Article] [Google Scholar]
Wang X, Li H, Zhang W, et al. Unlocking fast and highly reversible sodium storage in Fe-based mixed polyanion cathodes for low-cost and high-performance sodium-ion batteries. J Mater Chem A 2023; 11: 6978-6985. [Article] [Google Scholar]
Ellis BL, Makahnouk WRM, Rowan-Weetaluktuk WN, et al. Crystal structure and electrochemical properties of A₂MPO₄F fluorophosphates (A = Na, Li; M = Fe, Mn, Co, Ni). Chem Mater 2010; 22: 1059-1070. [Article] [Google Scholar]
Ling R, Cai S, Xie D, et al. Double-shelled hollow Na₂FePO₄F/C spheres cathode for high-performance sodium-ion batteries. J Mater Sci 2018; 53: 2735-2747. [Article] [Google Scholar]
Hassan M, Zhao Y, Liu Q, et al. Progress on Fe-based cathode materials for sodium-ion batteries. Carbon Neutraliz 2025; 4: e70000. [Article] [Google Scholar]
Xia Q, Zhang L, Wang D, et al. Metal ion complexation mediated synthesis of Na₄Fe₃(PO₄)₂P₂O₇/C hollow microspheres: Insights into structural evolution for high-performance sodium storage. Energy Storage Mater 2026; 84: 104849. [Article] [Google Scholar]
Ma X, Pan Z, Wu X, et al. Na₄Fe₃(PO₄)₂(P₂O₇)@NaFePO₄@C core-double-shell architectures on carbon cloth: A high-rate, ultrastable, and flexible cathode for sodium ion batteries. Chem Eng J 2019; 365: 132-141. [Article] [Google Scholar]
Qi X, Dong H, Yan H, et al. Hollow Core-Shelled Na₄Fe_2.4Ni_0.6(PO₄)₂P₂O₇ with tiny-void space capable fast-charge and low-temperature sodium storage. Angew Chem Int Ed 2024; 63: e202410590. [Article] [Google Scholar]
Wu X, Wu C, Wei C, et al. Highly crystallized Na₂CoFe(CN)₆ with suppressed lattice defects as superior cathode material for sodium-ion batteries. ACS Appl Mater Interfaces 2016; 8: 5393-5399. [Article] [Google Scholar]
Yang D, Xu J, Liao XZ, et al. Structure optimization of Prussian blue analogue cathode materials for advanced sodium ion batteries. Chem Commun 2014; 50: 13377-13380. [Article] [Google Scholar]
Fan S, Liu Y, Gao Y, et al. The design and synthesis of Prussian blue analogs as a sustainable cathode for sodium-ion batteries. SusMat 2023; 3: 749-780. [Article] [Google Scholar]
Wang W, Gang Y, Peng J, et al. Effect of eliminating water in prussian blue cathode for sodium-ion batteries. Adv Funct Mater 2022; 32: 2111727. [Article] [Google Scholar]
Peng J, Huang J, Gao Y, et al. Defect-healing induced monoclinic iron-based prussian blue analogs as high-performance cathode materials for sodium-ion batteries. Small 2023; 19: 2300435. [Article] [Google Scholar]
Qu Z, Luo W, Gao C, et al. Cryo-synthesized Prussian blue analogues as advanced cathode materials for potassium-ion batteries. Natl Sci Open 2025; 4: 20250022. [Article] [Google Scholar]
Xie B, Zuo P, Wang L, et al. Achieving long-life Prussian blue analogue cathode for Na-ion batteries via triple-cation lattice substitution and coordinated water capture. Nano Energy 2019; 61: 201-210. [Article] [Google Scholar]
Xu X, Zhu S, Yang C, et al. A novel strategy for the reduction of coordinated water in Prussian blue analogues for their application as cathode materials for sodium-ion batteries. J Mater Chem A 2025; 13: 11848-11860. [Article] [Google Scholar]
Duan J, Sun Y, Li B, et al. Tailoring coordinated water in sodium-rich phase for high-performance Prussian blue cathodes. Nanoscale 2025; 17: 24707-24714. [Article] [Google Scholar]
Jang J, Jeong H, Hong J, et al. Anion effects on crystal water reactivity and cathode-electrolyte interphase of prussian blue in sodium-ion batteries. Small Methods 2026; 10: 2500827. [Article] [Google Scholar]
Peng J, Zhang W, Liu Q, et al. Prussian blue analogues for sodium-ion batteries: Past, present, and future. Adv Mater 2022; 34: 2108384. [Article] [Google Scholar]
Ding X, Zhou Q, Wang Z, et al. An ultra-stable Mn-based Prussian blue compound effectively suppresses Jahn–Teller distortion as a superior cathode material for sodium-ion batteries. J Mater Chem A 2024; 12: 27598-27609. [Article] [Google Scholar]
Shang Y, Li X, Song J, et al. Unconventional Mn vacancies in Mn–Fe prussian blue analogs: Suppressing Jahn–Teller distortion for ultrastable sodium storage. Chem 2020; 6: 1804-1818. [Article] [Google Scholar]
Wang Y, Yang C, Yao L, et al. Dissolution inhibition strategy stabilizes manganese prussian blue analogs for high-energy sodium-ion batteries. Adv Funct Mater 2025; 35: 2423867. [Article] [Google Scholar]
Ji M, Jin T, Xu Q, et al. High-entropy layer grown on Mn-based prussian blue analog for na-ion storage. ACS Energy Lett 2025; 10: 5165-5173. [Article] [Google Scholar]
Wang M, Ling R, Zhou C, et al. Sequentially epitaxial multi-shelled Mn-based Prussian blue cathode for highly stable sodium-ions batteries. Energy Storage Mater 2024; 69: 103376. [Article] [Google Scholar]
Huang Y, Xie M, Wang Z, et al. A chemical precipitation method preparing hollow–core–shell heterostructures based on the prussian blue analogs as cathode for sodium-ion batteries. Small 2018; 14: 1801246. [Article] [Google Scholar]
Wang CC, Zhang LL, Fu XY, et al. Hollow layered iron-based prussian blue cathode with reduced defects for high-performance sodium-ion batteries. ACS Appl Mater Interfaces 2024; 16: 18959-18970. [Article] [Google Scholar]
Wan P, Xie H, Zhang N, et al. Stepwise hollow prussian blue nanoframes/carbon nanotubes composite film as ultrahigh rate sodium ion cathode. Adv Funct Mater 2020; 30: 2002624. [Article] [Google Scholar]
Wei Y, Zheng M, Zhu W, et al. Hollow structures Prussian blue, its analogs, and their derivatives: Synthesis and electrochemical energy-related applications. Carbon Neutraliz 2023; 2: 271-299. [Article] [Google Scholar]
Nai J, Zhang J, Lou XWD. Construction of single-crystalline prussian blue analog hollow nanostructures with tailorable topologies. Chem 2018; 4: 1967-1982. [Article] [Google Scholar]
Nai J, Lou XWD. Hollow structures based on prussian blue and its analogs for electrochemical energy storage and conversion. Adv Mater 2019; 31: 1706825. [Article] [Google Scholar]
Zhu X, Tang J, Huang H, et al. Hollow structured cathode materials for rechargeable batteries. Sci Bull 2020; 65: 496-512. [Article] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.