Issue |
Natl Sci Open
Volume 4, Number 2, 2025
Special Topic: Flexible Electronics and Micro/Nanomanufacturing
|
|
---|---|---|
Article Number | 20240013 | |
Number of page(s) | 23 | |
Section | Materials Science | |
DOI | https://doi.org/10.1360/nso/20240013 | |
Published online | 06 June 2024 |
REVIEW
Achieving rapid actuation in liquid crystal elastomers
1
Tianmushan Laboratory, Hangzhou 310023, China
2
Key Laboratory of Aerospace Advanced Materials and Performance, Ministry of Education, School of Materials Science and Engineering, Beihang University, Beijing 100191, China
3
Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Hong Kong, China
* Corresponding authors (emails: zhijianw@buaa.edu.cn (Zhijian Wang); qiguanghe@cuhk.edu.hk (Qiguang He))
Received:
23
April
2024
Revised:
16
May
2024
Accepted:
3
June
2024
Liquid crystal elastomer (LCE) is one kind of soft actuating material capable of producing large and reversible actuation strain, versatile and programmable actuation modes, and high work density, which can be widely exploited for next-generation soft robots. However, the slow response speed and low power density in LCE-based actuators remain a challenge, limiting their practical applications. Researchers have been considering how to improve these performances. In this review, we discuss the fundamentals of the LCEs and emphasize the fast actuation strategies developed in recent years. Initially, we introduce conventional preparation strategies. Then, we describe typical actuation mechanisms of LCEs, discussing their features and limitations. Subsequently, we summarize several possible approaches as case studies to enhance the actuation performance of LCEs, including reducing physical sizes, introducing active heating-cooling mechanisms, utilizing mechanical instability, and developing dielectric LCEs. Finally, we discuss the future research opportunities and challenges for rapid actuation of LCEs.
Key words: liquid crystal elastomer / soft robotics / rapid actuation
© The Author(s) 2024. Published by Science Press and EDP Sciences.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.